FBT VAIE 7500: voice evacuation systems to integrate and manage up to 36 Areas

This new range of voice evacuation systems, wall-mounted and to manage up to six zones, has been presented a few days ago in Prolight + Sound 2018.

OK 7500 of FBT has been presented for the first time recently in Frankfurt (Germany), during the company's participation in Prolight + Sound 2018. This range of voice evauation systems consists of three models, conforms to EN standards 54-16:2008 and EN 54-4 (available in the Spanish market through Magnetron).

Designed for wall mounting, each VAIE unit 7500 allows you to connect up to six zones, and the possibility of integrating up to six systems, via redundant dual-line connection, to manage a maximum of 36 Areas, each with its own audio source.

FBT has designed the new VAIE range 7500 for installations requiring emergency systems of maximum reliability and operation, since it combines the characteristic robust design of this manufacturer with a software translated into eight languages.

The nominal power of the amplifier is 500 W in total, which may be distributed at its discretion among the zones, with a maximum limit of 250 W by zone. The VAIE model 7502 distributes the 500 W between two zones, while the VAIE 7504 performs at a maximum of four zones, and VAIE 7506 it does so in six zones.

These systems have up to seven supervised inputs that connect to a fire detection center, allowing you to activate up to eight previously recorded messages (two emergency for alert and evacuation, and six that can be classified as emergency, evacuation or diffusion). They also integrate a music input for audio sources, plus three configurable relays and a configurable auxiliary input.

Each unit integrates a handheld microphone for firefighters, and each VAIE system can be configured as the main emission microphonic base, with the possibility of connecting up to sixteen microphone bases in total (with MBT drives 1106 or MBT 1112). Everything is controlled from the front panel, with a 4.3" backlit touchscreen, which allows you to select alert and evacuation zones, as well as adjusting the volume and system settings according to the different levels of authorization.

In addition, each drive has a protected local button (with own Led) to activate emergency mode on the system, plus another that resets the active alarm signal. It is also possible to connect up to four FMD emergency remote units 2001 or FMD 2012 (as well as two TSC6000-EN with touch screen).

Other articles on FBT, Magnetron, Prolight+Sound2018